10 Best Bike Wall Mounts – Comparison & Reviews

 

The Essential Guide to Finding the Best Bike Wall Mount + Reviews

 

If you’re trying to find a way to store your beloved ride and save some space, then getting the best bike wall mount is what you need. However, searching for the right mount can be a real drag in today’s overcrowded market. The good news is that you won’t have to waste your precious time, as we’ve checked some of the most popular models among cyclists and picked the ones offering stable and solid support without costing a load of money. After looking at countless models, we can say that one that you should definitely consider as a first choice is the Ibera Horizontal Bike Wall Hanger. It has a simple design that makes it easy to install and use, it’s made of aluminum and ABS, and it can be adjusted to fit a variety of frames. In case you can’t find this item or you’re looking for a different design, the Steadyrack Classic Bike Rack might just fit your needs.

 

 

Comparison table

 

 

 

10 Best Bike Wall Mounts (Updated Reviews) in 2020

 

 

Finding an adequate bike rack wall mount shouldn’t be hard, but unfortunately, it is, considering that there are hundreds of these models for sale every minute. The good part is that you won’t have to go through all bike wall mount reviews as we’ve prepared a list with the ones offering top-notch quality for the right price.

 

 

1. Ibera Horizontal Bike Wall Hanger

 

It comes with a basic design that’s sturdy and reliable. It is made of aluminum so it’s strong, lightweight, but also resistant to corrosion. The weight limit is 39.6 pounds which should be enough for most bikes out there, even downhill models. You can adjust the angle of the arms at 45 degrees so you can balance your bike and make sure that it stays level.

The main beam is adjustable from 8.5 to 12 inches, for a total distance of up to 14.8 inches from the wall. The two arm holders of the hanger have ABS pads to ensure that they don’t scratch your bike even if you take it off and put it on daily. It should fit most conventional bike frames but some special ones, too.

This unit is easy to install as you only need to use some wall anchors and you’re set.

 

Pros

This hanger mounts to masonry or concrete walls and it can help you save a lot of space while keeping your bike properly stored.

Mounting it is quite easy as you only need to use some wall anchors for the installation.

The model is made of aluminum alloy which is strong yet light and it is corrosion-resistant.

The two arm holders are coated with ABS to ensure a proper grip while eliminating the risk of scratches to the bike frame.

The main beam can be adjusted to a length of up to 12 inches for a maximum distance of 14.8 inches from the wall.

 

Cons

This hanger might not fit a variety of bike frames so you should check the dimensions of the unit as well as of your own bike to make sure it works for you.

In some cases, the locking teeth might not hold the position of the arms properly, and there’s no way to tighten them.

Buy from Amazon.com for ($22.99)

 

 

 

2. Steadyrack Classic Bike Rack

 

Just as the name says, this is a classic bike rack that will help you store a variety of bike frames without a worry. It can fit bikes with wheels from 20 to 29 inches and with tires up to 2.4 inches so it should be good for most bikes.

It is tested for 80 kg but the recommended limit is 35 kg or 77 pounds, which is more than enough for even some of the heaviest bikes out there. It is mostly made of steel so it should be able to last for a long time and it also has UV-treated plastic for prolonged use.

Its simple design enables you to store your bike horizontally and the best part is that you won’t have to do any heavy lifting. All you need to do is to balance the bike on the rear wheel, roll the front tire into the rack and then rest the rear on the bottom part.

 

Pros

You can free up loads of space with this rack, and you can actually use multiple ones to store many bikes while still saving space. It’s perfect for garage use but you can also use it inside your home without a problem.

This thing has a weight capacity of 77 pounds which is just great as you can put even the heaviest bike you have and not even be close to reaching this limit.

It can fit bikes with different frame geometries, wheels with diameters between 20 and 29 inches, and tires that go up to 2.4 inches in width, which means pretty much any except for fat bikes.

 

Cons

It’s definitely not the cheapest rack around, and some people might be unable to justify the higher cost.

The instructions can be deceiving as the drill bit size recommendation is way too big. Make sure you use a smaller drill bit when using it in wood or studs to ensure the proper grip.

Buy from Amazon.com for ($75.99)

 

 

 

3. StoreYourBoard 5 Bike Garage Rack

 

If you’re looking for a sturdy and reliable rack that allows you to store multiple bikes, then this is it. It has a really strong construction, with the main metal bar being able to hold a total of 200 pounds. It is also powder-coated to be resistant to corrosion and last for a long time. There are 5 hooks so you can store that many bikes on the rack.

These are adjustable so you can hang anything from kids’ bikes to mountain bikes to e-bikes without a worry. There are 45 mounting points for the hooks so you can customize them to fit the bikes in the best way possible. All hooks have a protective rubber coating in order to ensure that the front wheel rims don’t get scratched.

You get all the mounting hardware included and installing the rack should be easy and you also get independent wall mounting brackets for any stud spacing.

 

Pros

Putting the bikes in the rack is easy as you only need to hang the front wheel and rest the rear one on the wall (or you can install special pads).

The design of this rack allows you to hang up to 5 bikes vertically and it is perhaps one of the most efficient in terms of space saved.

Thanks to the 45 mounting holes, you can space the hooks in any way you need to ensure that all the bikes stay properly and do not touch each other.

With a capacity of 200 pounds, you should be able to store even heavy bikes without worrying.

 

Cons

It is a bit expensive, although you have to consider the fact that it can hold up to 5 bikes and there are models that cost as much and can hold a single bike.

While the position of the hooks can be adjusted, if you’re hanging 5 adult bikes, things could get a bit crowded.

Buy from Amazon.com for ($68.99)

 

 

 

4. HOMEE Heavy Duty Bicycle Wall Hook Mount Holder

 

This model from Homee has a simple design that allows you to easily hang your bike on the wall and help you save space. It is made of strong steel and it has a load capacity of 60 pounds which means you can hang even the heaviest bikes, e-bikes included, without a worry.

You can either buy one hanger or get a pack of two – either way, it’s still a very cheap solution to store your bikes. The hook is covered in a sponge material which will ensure that the rim on the front wheel doesn’t get scratched or dented. Installing the hanger is easy and you get the screws needed to mount it on a wall.

The hanger has a tread pattern that offers more grip for the front tire. The special design of the hook and the plate ensure that there won’t be any accidental release so there’s no risk of damage to the bikes or having someone injured.

 

Pros

This hanger comes with a simple design that’s all about function, and at a price that’s hard to beat.

The item is made of steel which ensures strength and long-lasting use. The hanger can support up to 60 pounds which should suffice for even heavy e-bikes.

The hook allows you to hang the bike properly without the risk of sliding. The sponge covering the hook ensures that your rim won’t get scratched or dented.

Installing this product is really easy and implies drilling 4 holes and using the supplied wall anchors or screws, or you can use your own.

This support allows you to hang your bike horizontally and save a lot of space in the process.

 

Cons

The supplied wall anchors and screws aren’t that great so you might want to get your own mounting hardware from a local shop.

The hook is not that large so you might have trouble hanging mountain bikes with really thick tires.

Buy from Amazon.com for ($22.99)

 

 

 

5. Stalwart Rack Hooks Wall Mount Flip Storage

 

This is an inexpensive bike rack that is simple and easy to use. It is made of tough steel and can hold up to 50 pounds which means most bikes can be stored without a worry. The hooks are coated in EVA foam to offer an enhanced grip and protect your bike’s frame from damage.

Besides allowing you to store a bike and get to save quite a bit of space, you can also fold the bracket and get even more space when you aren’t keeping the bike on it. Despite its simple appearance, this unit is quite stable and it can keep any bike stable so there’s no risk of it sliding.

This product measures 13.25 inches x 11. 6 inches x 4 inches so it’s large enough and should be able to fit a wide range of frames. Installing this wall mount is not hard at all, as you only need to drill two holes and use the supplied hardware.

 

Pros

This rack is simple but the steel construction ensures that you can store even heavy bikes on it. The stated weight capacity is 50 pounds which is actually enough for even some of the heaviest bikes.

The hooks are covered in EVA foam to ensure proper grip when holding the bike frame and also to prevent any damage such.

You get the mounting hardware included in the package so you can immediately install this rack and get to store your bike right away.

The bracket can fold parallel to the wall so you don’t get hindered by it when not storing the bike on the rack.

 

Cons

There are only two screws holding this rack onto the wall which might raise some concerns regarding its stability.

The screws are of questionable quality and might get stripped fast so you might want to get others for the installation.

Click to see the price on Amazon!

 

 

 

6. Delta Cycle Leonardo Da Vinci Single Bike Storage Rack

 

If you’re looking for a quick and easy solution for storing your bike, whether it’s in your garage, house, or special room, the rack from Delta Cycle is bound to make you happy. It comes at a more than affordable price, and it has a simple installation that even non-mechanically-inclined people should be able to perform.

The construction is mostly metal, with the hook part being covered by a rubber sleeve that ensures that no scratches will affect your front rim. The hook has an open design which means it can take wheels and tires of most sizes. It can hold a maximum of 40 pounds which should suffice for most bikes.

You also get a special tray that you mount on the bottom of the wall and it serves to hold the bike’s rear tire which is always nice since you’ll protect your wall, especially after returning from a ride in rainy and muddy conditions.

 

Pros

This product comes at an affordable price and it has two pieces: the top one, with a hook, that helps you hang the bike, and the bottom tray that holds the rear wheel and prevents your walls from getting smudged or damaged.

The metal construction allows this to last for a long time and to be able to hold up to 40 pounds so most types of bikes can be stored.

Installing this on your wall is a piece of cake and you don’t need to assemble anything beforehand.

The rubber sleeve on the hook will prevent any kind of damage to your bike’s front rim.

 

Cons

The hook is a bit too closed so it might take a bit more effort to slide the front wheel of the bike onto it.

The rubber sleeve on the hook might shred in a few months, in which case you should tape it or cover it with another soft material.

Buy from Amazon.com for ($14.53)

 

 

 

7. Pro Bike Tool Bike Wall Mount Horizontal Indoor Storage

 

This is a well-made hanger that features a simple yet effective construction for care-free storage. The ratchet system is mostly made of steel which gives it increased resistance and durability. It can hold up to 48 pounds so that means you can hang most normal bikes but also electric models unless these are really heavy.

The push-button mechanism secures the arms in place so there’s no risk of your bike sliding and falling. The arm cradles are made of soft rubber to prevent damage to the bike’s frame and they are designed to properly hold a wide range of frame sizes and geometries as well as handlebars up to 31 inches in length.

The rubber cradles also have special spacing channels so top tubes are gripped properly without the risk of displacement or crushing. You also get an ultra-strong elastic rope in the package to tie the front wheel to the frame and prevent it from touching the wall.

 

Pros

This wall mount has a sturdy construction, made of steel, and it is able to hold up to 48 pounds so you don’t have to worry if you have a heavier bike.

Thanks to the push mechanism that locks the arms in place, there is no risk of your bike sliding and touching the wall or worse, falling off it.

The arm cradles are made of rubber and have special spacings which not only ensure a proper grip for a variety of frame sizes and geometries, but also safe storage without the risk of scratches or dents.

Installing this is quite easy, but you have to make sure that in case you mount it on a plasterboard, you use the wooden stud behind it.

 

Cons

This hanger is not able to fit bicycles that have no top tube, such as many city bikes, especially women’s models. However, you can use a top tube adapter, but you’ll have to purchase it separately.

Click to see the price on Amazon!

 

 

 

8. Racor – B-1R – Solo Vertical Bike Rack Wall Mounted

 

This bike rack from Racor has a well-built hook and plate design and it’s among the sturdiest in its category. It can fit both road and mountain bike wheels without a worry, thanks to the open hook. The 12-gauge steel construction allows it to support bikes weighing 50 pounds, while the epoxy coating ensures that it doesn’t rust in time.

With this model, you can keep your bikes neatly organized and save storage space. There’s also a security loop which allows you to use a bike lock to secure your bike and prevent theft. The hook comes with a molded rubber guard which protects your front rim from becoming dented or scratched.

There’s no assembly required and you can install this rack easily. You just need to mark the position of the two holes on a concrete/masonry wall or wooden stud, drill the holes, mount the screws and the front plate, and you’re done.

 

Pros

This thing has a really solid build since it is made of 12-gauge steel that’s properly welded together. It’s no wonder it can hold up to 50 pounds.

The steel is coated with epoxy which gives it corrosion resistance and helps prevent rust in the long run.

It is very easy to install and you won’t have any problems unless you are trying to mount it to a drywall and need to find a wood stud behind it.

There’s a security loop welded to it so you can pass a cable lock through it and make sure nobody leaves with your bike.

 

Cons

The protective rubber guard might come off after a while, in which case you would need to glue it to the hook with a strong adhesive.

There’s no tray for the rear wheel so you will have to purchase it on your own if you want to protect the wall.

Buy from Amazon.com for ($23.74)

 

 

 

9. Koova Wall Mount Bike Storage Rack for 6 Bicycles

 

If you have multiple bikes and you don’t want to spend a fortune on separate racks, this one from Koova is a nice choice. It’s made of heavy gauge steel so it should last for a long time. It is able to hold around 200 pounds safely, and you can store up to 6 bikes, so unless they’re all really heavy, you shouldn’t have a problem with that.

The main bar is easy to attach to the wall, while the hangers can be adjusted in many positions so you can properly fit all the bikes. The hangers are also angled so that they offer adequate support. Not only do they help you easily roll your bikes and slide the front wheels in, but they also allow for tire sizes up to 3 inches in width.

The wheel cushion protects the front rims and they are also replaceable in case they get worn out.

 

Pros

It is made of heavy gauge steel which ensures proper support and is able to hold up to 6 bikes and a total weight of 200 pounds.

The entire unit is powder-coated to ensure long-lasting support without rust.

The position of the hangers can be adjusted so you can make sure all your bikes fit properly on the rack.

The hangers have a wide angle so you can easily slide on any bike wheel, while the maximum width is 3 inches, which practically allows most bikes, except for some fat bikes.

Thanks to the cushions on the hooks, you don’t have to worry about scratches or the bikes sliding off.

 

Cons

While the product is advertised to be able to hold 6 bikes, unless there are also some kids’ bikes in there, you might have trouble putting more than 4 without overcrowding them.

The installation instructions could have been a bit clearer.

Buy from Amazon.com for ($97.95)

 

 

 

10. PHUNAYA Bike Hanger 2pcs Wall Mount Hook

 

With this product, you get two wall mounts at a price that’s more than reasonable. The unit is made of steel so you should be able to rely on it for a long time, and it can hold 68 pounds. It is easy to install the base plate by using just 3 screws, and you can mount it on concrete or masonry walls or on wood studs.

The horizontal bar with the holders can be easily folded up to save space when you are not storing the bike. The hooks that hold the bike frame are covered in soft rubber to prevent damage. This type of design may take a bit more space but it’s safer than the ones that hold the front rim.

There’s a 30-day money-back policy in case you’re not satisfied and free replacement for one whole year if you happen to have problems with the product.

 

Pros

The maximum weight is 68 pounds so you can rest assured that you can store just about any kind of bike, except for the really heavy e-bikes.

It is easy to install as you only need to use 3 screws and anchors. For drywall, you want to make sure that you mount it on a wood stud.

The horizontal bar folds up so you can save some more space and avoid it from hindering you when not storing a bike on it.

The hooks are covered in soft rubber so you won’t have to worry about damage to the bike frame.

 

Cons

The mounting hardware and especially the drywall anchors, aren’t very good so you might want to get some anchors and screws from a local shop to ensure that you mount the rack properly.

The horizontal bar should be longer as bikes with wide handlebars will touch the wall before resting properly in the hooks.

Buy from Amazon.com for ($33.98)

 

 

 

Our Comprehensive Buying Guide

 

Whether you’re looking for an affordable bike wall mount or you’re more interested in a model that’s strong and durable, you might find that the market is simply flooded with these things. Picking a bike wall bike mount requires that you’re familiar with the main types and their specifications, which is what the following guide is meant to clarify.

Horizontal or vertical racks?

If you’re looking for a wall mount for the bike, you need to consider whether you want to store your ride horizontally or vertically, since there are two main types of racks.

There’s the hook-type that allows you to hang the front wheel up and then let gravity handle the rest, meaning that the bike will be held by the front while the rear tire rests on the wall. Then there’s the arm cradle-type which holds the bike frame in a more or less horizontal position.

The vertical bike mount for wall has the advantage of saving more space, especially if we’re talking about hanging multiple bikes. Some people might not feel comfortable hanging the front rim to the hook, and sometimes, it can be hard to lift a bike from the ground to put on the rack.

Horizontal mounts are somewhat easier to use but might occupy more space, and it might be inconvenient to store bikes with wide handlebars. Balancing the bike might also be tricky with some models, especially if you want to prevent it from sliding or even falling off, which is why you might want to read the specific bike wall mount review to make sure you can properly store it.

 

Single or multiple bikes?

If you have just one bike, then a single cheap bike wall mount might do the trick. You won’t have to spend more than a few bucks and you’ll get a rack that can hold your bike easily, whether it’s the vertical or horizontal variety.

In case you have more bikes, then you should be looking for either a long vertical rack or multiple bike mounts for wall that are the horizontal variety.

With vertical racks, things are simple: the system has a single, long bar that attaches horizontally to the wall, onto which you attach the individual hooks. This type will save you a lot of space, although you should be careful not to overcrowd it and allow the bikes to touch and scratch each other.

For multiple horizontal racks, you will need more space on the wall and also think of hanging one bike above another. This might be impractical for large and heavy bikes, as the last thing you’d want is to have to lift 30-40 pounds every day.

Weight capacity and compatibility

Most bike racks can hold anywhere from 30-40 to 70 pounds or more, although you should be skeptical about thin models that are advertised to be able to hold really heavy bikes.

As for compatibility, you should know that when it comes to a bike wall mount apartment types, meaning the vertical hook ones, are able to fit more types of bikes and they’re more space-efficient, although that’s not to say vertical racks aren’t good for apartments.

Most models are able to fit wheels ranging from 20 to 29 inches, but if you have tires that are over 2.35 inches, you might want to ensure that it is a mountain bike wall mount that can hold at least 3-inch-wide tires. Also, make sure that the hooks have rubber coatings on them to prevent scratches on the rims.

Horizontal racks will be unable to hold bikes that don’t have a top tube or with a strange frame geometry, so you should make sure it can hold your bike before buying a specific model.

 

 

Frequently Asked Questions

 

Q: How much weight can a bike wall mount hold?

Checking the weight capacity of the bike rack is a very good idea, as these range widely, depending on the model, construction, mounting hardware, etc. Generally, any bike rack is advertised to hold a minimum of around 40 pounds, which means that you should be able to store most normal bikes.

The majority of models can hold around 50 pounds or so, but you can also find racks that are advertised to hold 70 pounds or more, which means that you could also hang a heavy electric bike.

These specifications are for single-bike racks as if we’re talking about multiple-bike ones, the usual specified maximum weight is about 200 pounds. That means that you should be able to hang around 4 bikes easily, but with 6, besides possibly exceeding the maximum weight, you might also have trouble actually storing all due to the limited available space between them.

Q: Are all bike wall mounts reliable?

There are two things that make a bike wall mount reliable: a sturdy construction, and proper mounting hardware, installed correctly. The first part is quite obvious, as a rack that has thin bars won’t be able to hold heavy bikes and will tend to fail sooner or later. Besides heavy-gauge metal – steel, preferably – the welds also need to be good so there’s no risk of fatigue failure.

Then there are the mount types and the hardware. You need a model that has solid base plates or bars that can hold the horizontal hangers or hooks. These also need to be properly installed, using correct hardware, such as adequate screws for wooden walls or studs behind drywalls (don’t install directly on a drywall), strong anchors and screws for masonry/concrete walls, etc.

The design of the hangers/cradles/hooks is also important, as these are supposed to keep the front rim or frame of a bike steady.

 

Q: How do I install a bike wall mount?

Before purchasing any kind of rack, it is recommended that you read the specifications and that you ensure that it comes with the right mounting hardware for the type of wall you are planning to install it on.

For example, most manufacturers do not recommend installing racks on drywall, even if you’re using special drywall anchors, as the risk is high that they will eventually fail, especially if we’re talking about a heavy bike and long-term use. You can install racks on drywall only if you make sure to use the wood studs behind it.

Any installation usually implies drilling holes/guide holes in concrete or masonry walls/wood studs and then using adequate screws to mount the racks. You might want to read a few reviews of the model you’re about to purchase to make sure it can be installed properly or that it comes with clear instructions.